Starting Point Formulation

NEOCAR Acrylic 820
White Solid Hide Stain
Formulation Suggestion E-2499A
Ingredients
Pounds
Gallons
Add the following to a disperser:

Water
250.0
29.98

Proxel GXL[1]
1.9
0.20

Propylene Glycol
35.0
4.07

CELLOSIZE™ HEC ER-4400
3.0
0.27
Mix above ingredients until dissolved, then add:

Tamol 165[2]
11.6
1.32

TERGITOL™ Nonionic Surfactant NP-9
2.0
0.22

Drewplus L-475[3]
2.0
0.23

Kronos 2310[4]
175.0
5.13
325 Mesh White Waterground Mica[5]
25.0
1.13

Minex 4[6]
200.0
8.86

Attagel 50[7]
4.0
0.21
Disperse to 3-4 Hegman grind, then add:

NEOCAR™ Acrylic 820
283.4
33.34

Butyl CARBITOL™ Solvent
9.9
1.32

Drewplus L-475[3]
2.0
0.23

Water
106.0
12.73

Troysan Polyphase P20T[8]
7.0
0.76
Total:
1117.8
100.00
Suppliers:
[1] Avecia
[2] Rohm and Haas
[3] Drew
[4] Kronos
[5] KMG
[6] Unimin
[7] Engelhard
[8] Troy


Typical Primer Properties

Pigment Volume Concentration, %
51

Total Solids, %
image

by weight

by volume

47.5
29.9

Weight per Gallon, lb.
11.17

Stormer, KU.
63

pH Value.
8.5

Heat-Aged Stability, 2 weeks at 140°C
Pass

Freeze-Thaw Stability, cycles passed
. 5

NOTICE: No freedom from any patent owned by Seller or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.