|
UCAR Latex 455 UCAR™ Latex 455 is a self-crosslinking acrylic latex designed for low-cost industrial primers and topcoats. Enamels based on UCAR Latex 455 have an excellent balance of hardness and flexibility with good water and solvent resistance. Gloss levels in the range of 70 to 80 (60°) can be achieved with UCAR 455. This product is recommended for utility shelving, temporary roof decking, appliance liners and back covers, and duct work.
Typical Properties(1)
| Property |
Value |
| Total Solids, % by weight |
45.0 |
| Particle Size, microns |
0.3 |
| Viscosity, cP |
60 |
| Weight per Gallon, lb |
 |
Latex |
| Polymer |
|
8.9
9.55 |
| Specific Gravity |
1.06 |
| pH Value |
4.2 |
(1) The data provided for these properties are typical values, intended only as guides, and should not be construed as sales specifications.
| Product Information |
| UCAR Latex 455 (1.3MB PDF) |
| Safety Data Sheets |
| Safety Data Sheet (108KB PDF) |
| Starting Point Formulations for UCAR Latex 455 |
| White Coil Coating, Formulation Suggestion LP-3826 |
| Low-Temperature Bake, Semigloss White Enamel, Formulation Suggestion LP-3786 |
| Low-Temperature Bake, Black Primer/Topcoat, Formulation Suggestion LP-3787 |
| Low Temperature Bake, Semigloss White Tint-Base Enamel, Formulation Suggestion LP-3788 |
| Low-Temperature Bake, White Primer, Formulation Suggestion LP-3789 |
| Low-Temperature Bake, Red Iron Oxide Primer, Formulation Suggestion LP-3790 |
| Low-Temperature Bake, Black Iron Oxide Primer, Formulation Suggestion LP-3791 |
|
