Super TUFF-R
TUFF-R™ Commercial and Super Tuff-R Commercial Product Information Sheet (51.8KB PDF)
Super TUFF-R is a patented high-performance polyisocyanurate foam core insulation with patented three-ply poly/aluminum foil facers laminated to the core, resulting in unsurpassed durability. One facer is painted black; the other facer is radiant barrier-quality reflective foil.
|
| Nominal Board Thickness** |
R-Value† 3 |
Board Size |
Edge Treatment |
Min Compressive Strength† † |
| .5" |
3.3 |
16" x 96"/48" x 96"/48" x 108" |
Square Edge |
25 psi |
| .75" |
5 |
16" x 96"/48" x 96"/48" x 108" |
Square Edge |
25 psi |
| 1.0" |
6.5 |
16" x 96"/48" x 96"/48" x 108" |
Square Edge |
25 psi |
| 1.5" |
9.8 |
16" x 96"/48" x 96"/48" x 108" |
Square Edge |
25 psi |
| 2.0" |
13 |
16" x 96"/48" x 96"/48" x 108" |
Square Edge |
25 psi |
Building Code Compliance
Complies with ASTM C 1289 Type I, Class II. Meets IBC/IRC requirements for foam plastic insulation. See NES NER 616.
**Not all product sizes are available in all regions.
† R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2 "h "°F/Btu.
† † Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM PLAZAMATE insulation and for STYROFOAM HIGHLOAD 40, 60 and 100 insulation products) or at yield, whichever occurs first. Since STYROFOAM extruded polystyrene and Dow polyisocyanurate insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep. For static loads, 3-1 is suggested. For dynamic loads, 5-1 is suggested.
3 R-value determined by ASTM C518.
