STYROFOAM Z-Mate

CAD Details for STYROFOAM™ Z-Mate STYROFOAM Z-Mate Interior Wall - Guide Spec (55KB PDF) STYROFOAM Z-Mate Product Information Sheet (80KB PDF) STYROFOAM Z-MATE is an extruded polystyrene foam insulation board with square edges on all four sides. Its unique width fits between 24" o.c. Z furring which saves installation time by eliminating cutting or snapping of insulation boards.

Building Code Compliance

Complies with ASTM C 578 Type X. Meets IBC/IRC requirements for foam plastic insulation. See ICBO-ES ER 2257, BOCA-ES RR 21-02, NES NER 699, Und. Lab. Inc.^® Classified, see Classification Certificate D369.

**Not all product sizes are available in all regions.
†R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2•h•°F/Btu.
††Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM PLAZAMATE insulation and for STYROFOAM HIGHLOAD 40, 60 and 100 insulation products) or at yield, whichever occurs first. Since STYROFOAM extruded polystyrene and Dow polyisocyanurate insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep. For static loads, 3-1 is suggested. For dynamic loads, 5-1 is suggested.