STYROFOAM PLAZAMATE

Features 1/2" x 1/4" drainage channels on the bottom long edge of each board. CAD Details for STYROFOAM™ PLAZAMATE™ Specifying Extruded Polystyrene for Protected Membrane Roofing - Guide Spec (14KB PDF) STYROFOAM PLAZAMATE Product Information Sheet (23KB PDF) STYROFOAM PLAZAMATE extruded polystyrene foam insulation board with 1/2" x 1/4" drainage channels on the bottom long edge of each board. Designed for installation above waterproofing or roofing membranes in plaza deck applications. 10-year limited thermal warranty when installed in the PMR application.

Building Code Compliance

Complies with ASTM C 578 Type VII. Meets IBC/IRC requirements for foam plastic insulation. See ICBO-ES ER 2257, BOCA-ES RR 21- 02, NES NER 699, Und. Lab. Inc.™ Classified, see Classification Certificate D369.

**Not all product sizes are available in all regions.
^† R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2•h•°F/Btu.
^{† †} Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM PLAZAMATE insulation and for STYROFOAM HIGHLOAD 40, 60 and 100 insulation products) or at yield, whichever occurs first. Since STYROFOAM extruded polystyrene and Dow polyisocyanurate insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep. For static loads, 3-1 is suggested. For dynamic loads, 5-1 is suggested.