|
Low Temperature - Walls
|
Proper thermal and moisture control design is critical to the long-term performance of a low temperature building. The thermal performance of insulation in poorly designed low temperature building walls will rapidly deteriorate due to moisture infiltration greatly increasing the operating costs of the building. Dow Building Materials† offers a complete line of insulation solutions for low temperature walls.
There is a Dow insulation product that is right for every Low Temperature - Wall application.
|
| Features & Benefits |
Recommended Product Solution |
Product Information Sheet |
Guide Specs |
CAD Details |
| Exceptional fire performance allows product to be installed without a separate thermal barrier (except air plenum areas). 4.0 mil white embossed aluminum finish surface provides a tough durable product with moderate impact resistance. Product can be power washed to a maximum spray pressure of 1000 psi any spray tip (3' away) or 2000 psi for spray tip greater than 15 degrees (3' away) (see Dow representative for specific instructions). Highest R-value per inch for foam plastic insulation (6.5 per inch). Best high temperature stability (250"°F) |
THERMAX™ Heavy Duty |
English (51KB PDF) |
N/A |
N/A |
| Recommended in Wall applications only. Exceptional fire performance allows product to be installed without a separate thermal barrier (except air plenum areas). 16.5 mil white embossed aluminum finish surface provides a tough durable product with the highest impact resistance. Product can be power washed to a maximum spray pressure of 2000 psi (see Dow representative for specific instructions). Highest R-value per inch for foam plastic insulation (6.5 per inch). Best high temperature stability (250°F) |
THERMAX Heavy Duty Plus |
English (50.7KB PDF) |
N/A |
N/A |
| Exceptional fire performance allows product to be installed without a separate thermal barrier (except air plenum areas). 1.25 mil white embossed aluminum finish provide a tough durable product with light impact resistance. Product can be power washed to a maximum spray pressure of 1000 psi (see Dow representative for specific instructions). Highest R-value per inch for foam plastic insulation (6.5 per inch). Best high temperature stability (250"°F). |
THERMAX Light Duty |
English (50.7KB PDF) |
N/A |
N/A |
| Exceptional fire performance allows product to be installed without a separate thermal barrier (except air plenum areas).1.0 mil radiant quality aluminum facers provide a tough durable product. Highest R-value per inch for foam plastic insulation (6.5 per inch).Best high temperature stability (250"°F) |
THERMAX Sheathing |
English (50.6KB PDF) |
N/A |
N/A |
|
|
