STYROFOAM SM
CAD Details for STYROFOAM SM
Isolation du périmètre et sous la dalle - Spécification-type abrégée (11KB PDF)
Perimeter & Below Slab Guide Spec (9KB PDF)
Information sur le produit - STYROFOAM SM (79.7KB PDF)
STYROFOAM SM Product Information Sheet (435KB PDF)
STYROFOAM™ SM extruded polystyrene insulation, with its high compressive strength and moisture resistance, is recommended for use in below-grade applications, such as foundation or slab insulation, and ceiling applications. CAN/ULC S701 Type 4.
| Thickness** |
R-Value† |
Board Size |
Edge Treatment |
Min Compressive Strength† |
| 1" |
5 |
24" x 96" |
Butt Edge or Shiplapped |
30 psi |
| 1-1/2" |
7.5 |
24" x 96" |
Butt Edge or Shiplapped |
30 psi |
| 2" |
10 |
24" x 96" |
Butt Edge or Shiplapped |
30 psi |
| 2.4" |
12 |
24" x 96" |
Shiplapped |
30 psi |
| 2.5" |
12.5 |
24" x 96" |
Shiplapped |
30 psi |
| 3.0" |
15 |
24" x 96" |
Butt Edge or Shiplapped |
30 psi |
| 4.0" |
20 |
24" x 96" |
Butt Edge or Shiplapped |
30 psi |
| 90 mm |
17.5 |
400 mm x 2400 mm |
Butt Edge |
30 psi |
| 50 mm |
10 |
600 mm x 2400 mm |
Butt Edge or Shiplapped |
30 psi |
| 75 mm |
15 |
600 mm x 2400 mm |
Butt Edge or Shiplapped |
30 psi |
®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow
**Not all product sizes are available in all regions.
† R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2•h•°F/Btu.
†† Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM HIGHLOAD 40, 60 and 100 insulation products) or at yield, whichever occurs first. Since STYROFOAM extruded polystyrene insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep and fatigue deformations.
