STYROFOAM PERIMATE
 |
| Specially designed vertical grooves face the soil to channel water down to the footing drains or weeping tiles. |
Isolation du périmètre et sous la dalle - Spécification-type abrégée (11KB PDF)
Perimeter & Below Slab Guide Spec (9KB PDF)
Information sur le produit - STYROFOAM PERIMATE (46KB PDF)
STYROFOAM PERIMATE Product Information Sheet (26KB PDF)
STYROFOAM™ PERIMATE™ extruded polystyrene insulating drainage panels provide waterproofing, thermal insulation and drainage of the subsurface soil moisture in a single step. It is suitable for use in pervious, semi-pervious and practically impervious soils. Meets CAN/ULC S701 - Type 4 and CCMC Class A Type II drainage requirements. It complies with CCMC report #12826-R.
| Thickness** |
R-Value† |
Board Size |
Edge Treatment |
Min Compressive Strength†† |
| 2.125" |
10 |
24" x 96" |
Shiplapped |
30 psi |
**Not all product sizes are available in all regions.
† R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2•h•°F/Btu.
†† Vertical compressive strength is measured at 10% deformation (5% for STYROFOAM HIGHLOAD 40, 60 and 100 insulation products) or at yield, whichever occurs first. Since STYROFOAM extruded polystyrene insulation products are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep and fatigue deformations.
