The extreme team has you covered!
TRYMER™ 2000 XP, TRYMER™ 2500 and TRYMER™ 3000 polyisocyanurate pipe insulation products will soon be available in Blue™ – the color recognized for the highest standards of quality and performance. TRYMER 2000 XP will be produced in our “traditional” Blue; TRYMER 2500 and TRYMER 3000 will be a darker shade of Blue. All other properties will remain the same, so the current tan-colored products can be used interchangeably with their respective Blue replacements.
Blue TRYMER pipe insulation products will continue to be the best long-term value for your most demanding applications between -297°F and +300°F – from low-pressure steam to chilled water to cryogenic systems, such as LNG.
- Excellent thermal efficiency
- Low thermal conductivity
- Excellent dimensional stability over the entire service temperature range
- Long-lasting and moisture-resistant, even in high-humidity environments
- Environmentally friendly (all Dow polyisocyanurate insulation products are manufactured with hydrocarbon blowing agents, which have no ozone depletion potential)
- TRYMER 2000 XP meets ASTM E84 flame spread/smoke developed requirements (see chart)
| TRYMER Pipe Insulation Physical Properties |
| |
k-factor
(BTU•in/hr•ft2•°F) |
Compressive Strength
(psi) |
Permeability
(perm-inch) |
FS/SD
(ASTM E84) |
TRYMER 2000 XP
 |
0.19 |
Parallel to rise (thickness) |
25 |
4 |
25/50(1)
|
| Perpendicular to rise (width) |
24 |
|
25/55(2)
|
| Perpendicular to rise (length) |
30 |
|
25/450(3) |
TRYMER 2500
 |
0.19 |
Parallel to rise (thickness) |
40 |
3 |
25/295(4) |
| Perpendicular to rise (width) |
26 |
| Perpendicular to rise (length) |
36 |
TRYMER 3000
|
0.19 |
Parallel to rise (thickness) |
65 |
3 |
25/295(4) |
| Perpendicular to rise (width) |
45 |
|
| Perpendicular to rise (length) |
55 |
|
| (1) |
Up to 1". In most cases, ASTM E84 25/50 rated material is only needed in return air plenums within commercial buildings.
Please check with local code officials in your area to verify requirements. |
| (2) |
Up to 1-1/2". |
| (3) |
Up to 6". |
| (4) |
For all thicknesses. |
New Blue TRYMER: The color is changing, but our commitment to innovation, performance and quality remains the same.
To learn more about TRYMER pipe insulation products, contact your Dow authorized fabricator for product information or call a Dow technical service representative at 1-866-583-BLUE (2583) to determine the right product for your application.
