Guidelines and safety precautions

Due to vaporisation of the blowing agent contained in SCONAPORâ„¢ EPS flammable solvent-air mixtures can form even at room temperature. For safe processing it is therefore recommended to ventilate storage and workrooms well, preferably at ground level. For storage and interim storage silos a dedicated ventilation system is recommended. Open flames, sparks and other sources of flames and heat must be kept well away from rooms used for processing, handling and storage. The ban on smoking must be strictly adhered to.

For example, friction in conveying ducts can cause EPS raw beads, prefoamed particles and completed parts to become electrostatically charged. Sparks resulting from possible discharge must be avoided using suitable measures.

Further detailed information can be obtained from the SCONAPOR safety data sheet:

SCONAPOR F-038
SCONAPOR F-138
SCONAPOR F-238
SCONAPOR F-338
SCONAPOR F-338-S
SCONAPOR F-438
SCONAPOR F-438-S

Our experienced sales representatives are available to answer any questions you may have.

All information relating to SCONAPOR is based on our current knowledge and experience. Due to the multitude of possible influences on processing and use of the product, fabricators producing products based on SCONAPOR beads are required to carry out their own tests and trials. A guarantee of particular properties, or the suitability of a product for a particular application, cannot be derived from this information. Observing possible trademark rights, as well as compliance with applicable laws and other governmental enactments, is the responsibility of the fabricator of the product.


®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow