FILMTEC™ SW30XHR-400i Seawater Reverse Osmosis Element
FILMTEC™ SW30XHR-400i element is the highest rejection seawater element in the FILMTEC element range, enabling stringent water quality requirements to be met with single pass seawater systems in most situations.
| Product Name |
Nominal Active Surface Area
ft2 (m2) |
Permeate Flow Rate
gpd (m3/d) |
Stabilized Boron Rejection
(%) |
Stabilized Salt Rejection
(%) |
Minimum Salt Rejection
(%) |
| FILMTEC SW30XHR-400i |
400 (37) |
6000 (23) |
93 |
99.80 |
99.60 |
- The above benchmark values are based on the following test conditions: 32,000 ppm NaCl, 800 psi (5.5 MPa), 77°F (25°C), pH 8 and 8% recovery.
- Permeate flows for individual elements may vary +/-15%.
- Product specifications may vary slightly as improvements are implemented.
- Active area guaranteed +/-5%. Active area as stated by Dow Water & Process Solutions is not comparable to the nominal membrane area figure often stated by some element suppliers. Measurement method described in Form No. 609-00434.
|
®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow
