FILMTEC SW30HR LE-4040
FILMTEC™ SW30HR LE-4040 is a four-inch diameter version of SW30HR LE-400, the industry's leading seawater element which offers an unprecedented combination of high salt rejection and productivity to enable the lowest total cost of purifying high salinity water.
- SW30HR LE-4040 may be used as a pilot element to demonstrate performance for the design of larger systems.
- SW30HR LE-4040 delivers the highest sodium chloride and boron rejection to help meet World Health Organization (WHO) and other drinking water standards.
- SW30HR LE-4040 elements deliver high performance over the operating lifetime without the use of oxidative post-treatements like many competitive products. This is one reason FILMTEC elements are more durable and may be cleaned more effectively over a wider pH range (1 - 13) than other RO elements.
| Product Name |
Nominal Active Surface Area
ft2 (m2) |
Permeate Flow Rate
gpd (m3/d) |
Stabilized Salt Rejection
(%) |
Minimum Salt Rejection
(%) |
| FILMTEC SW30HR LE-4040 |
85 (7.9) |
1600 (6.1) |
99.75 |
99.60 |
1. Permeate flow and salt rejection based on the following test conditions: 32,000 ppm NaCl, 5 ppm boron, 800 psi (5.5 MPa), 77°F (25°C), pH 8, 8% recovery.
2. Permeate flows for individual elements may vary +/-20%.
3. Product specifications may vary slightly as improvements are implemented.
4. Stabilized Boron Rejection - 91%.
|
These membranes may be subject to drinking water application restrictions in some countries: please check the application status before use and sale.
®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow
