FILMTEC™ SW30HR-380
The FILMTEC SW30HR-380 is a premium grade seawater reverse osmosis element featuring both high active area and high salt rejection to offer the best long-term economics for seawater deslination systems.
-
FILMTEC SW30HR-380 delivers high boron rejection to help customers meet World Health Organization (WHO) and other drinking water standards.
-
FILMTEC SW30HR-380 elements deliver high performance over their operating lifetime without the use of oxidative post-treatments like many competitive products. This is one reason why FILMTEC elements are more durable and may be cleaned more effectively over a wider pH range (1-13) than other RO elements.
-
Automated, precision fabrication with a greater number of shorter membrane leaves, reduces the overall effect of fouling and maximizes membrane efficiency.
| Product Name |
Nominal Active Surface Area
ft2 (m2) |
Permeate Flow Rate
gpd (m3/d) |
Stabilized Salt Rejection
(%) |
Minimum Salt Rejection
(%) |
| FILMTEC SW30HR-380 |
380 (35) |
6000 (23) |
99.7 |
99.6 |
1. Permeate flow rate and salt rejection based on the following test conditions: 32,000 mg/l NaCl, 800 psig (55 bar), 77°F (25°C), pH 8, and 8% recovery.
2. Permeate flow rates for individual elements may vary +/-15%.
3. For the purpose of improvement, specifications may be updated periodically.
4. Feed spacer is 28 mil.
|
®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow
