FILMTEC SW30HR-320

FilmTec offers various premium seawater reverse osmosis (RO) elements to reduce capital and operation cost of seawater RO systems. FILMTEC™ products combine premium membrane performance with automated precision fabrication and maximize system output to unprecedented performance.

FILMTEC SW30HR-320 is a high productivity, very high rejection element designed to lower component economics. This element is also effective in treating high fouling feedwaters.

  • FILMTEC SW30HR-320 can effectively be used in permeate staged seawater desalination systems without impairing the performance of the downstream stage.
  • FILMTEC SW30HR-320 features a 34 mil feed spacer, alleviating the impact of fouling on pressure drop across a vessel and enhances cleaning capability.
  • FILMTEC SW30HR-320 delivers high performance over the operating lifetime without the use of oxidative post-treatments like many competitive products. This is one reason FILMTEC elements are more durable and may be cleaned more effectively over a wider pH range (1-13) than other RO elements.
  • Automated, precision fabrication reduces element variablity, increases reliability, and maximizes element efficiency, lowering your cost of operation.
Product Name Nominal Active Surface Area
ft2 (m2)		 Permeate Flow Rate
gpd (m3/d)		 Stabilized Salt Rejection
(%)		 Minimum Salt Rejection
(%)
FILMTEC SW30HR-320 320 (30) 6000 (23) 99.75 99.6
1. Stabilized Boron Rejection: 90%
2. Permeate flow and salt rejection based on the following conditions: 32,000 ppm NaCl, 5 ppm Boron, 800 psig (5.5 MPa), 77°F (25°C), pH 8, and 8% recovery.
3. Permeate flows for individual elements may vary +/-15%.
4. For the purpose of improvement, specifications may be updated periodically.
5. Active area as stated by FilmTec is not comparable to the nominal active area figure often stated by other element suppliers. Measurement method described in Form No. 609-00434 (168KB PDF).




These membranes may be subject to drinking water application restrictions in some countries: please check the application status before use and sale.


®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow
Related Links