FILMTEC SG30LE-400

FILMTEC™ SG30LE-400 is a low energy element with high overall rejection and high rejection of lower molecular weight organic compounds and silica. It operates at low pressure to deliver energy savings. This element is intended for use in the roughing stage of UPW systems in both new equipment and replacement situations where lower energy cost is desired.

Product Name	Nominal Active Surface Area ft² (m²)	Permeate Flow Rate gpd (m³/d)	Stabilized Salt Rejection (%)	Minimum Salt Rejection (%)
FILMTEC SG30LE-400	400 (37)	9,500 (36)	99.5	99.2

1. Permeate flow and salt rejection based on the following standard conditions: 2000 ppm NaCl, 150 psi (10.3 bar), 77°F (25°C), pH 8, and 15% recovery.
2. Flow rates for individual elements may vary but will not be more than 15% below the value shown.
3. Sales specifications may vary as design revisions take place.
4. Active area guaranteed +/-3%. Active area as stated by FilmTec is not comparable to nominal membrane area often stated by some manufacturers. Measurement method described in Form No. 609-00434.

®™^* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow