Dow Hyperlast engineering polyurethane excellence - MONOTHANE

MONOTHANE™ Single Component Polyurethane Elastomers

MONOTHANE™ Single Component Polyurethane Elastomers are polyester-based polyurethane elastomers. No mixing or dispensing equipment is needed. No vacuum degassing equipment is needed. An efficient air circulating oven is required for melt down at 70°C and curing at 135°C.

MONOTHANE Elastomers also overcome air entrapment, one of the major problems in manufacturing vertically cast rollers.  Several passes through a water-thin stage during the curing process, automatically degasses, producing bubble-free moldings. This is particularly important when making long rollers of small overall diameter.

MONOTHANE™ Single Component Polyurethane Elastomers offer a number of additional benefits including:

• Single component polyester-based.
• Low capital equipment costs.
• No mixing or dispensing equipment required.
• Custom formulated for each hardness grade.

MONOTHANE Polyurethane exhibits extreme durability and performance in demanding applications when compared with rubbers and other urethane systems.

MONOTHANE™ Single Component Polyurethane Elastomers are suitable for use in applications such as:

• Printing rollers
• Mechanical material handling rollers
• Steel mill rollers
• Anti-vibration mountings
• Textile spinners
• Capstan drive units.
• Seals, gaskets and rings
• Isostatic press bags.

MONOTHANE Polyurethane Elastomers are available in a hardness range from Shore A 20 to 90.

Please contact us to discuss how Dow Hyperlast can assist with a cost effective solution.

Dow Hyperlast is a trading name of Hyperlast Limited, Registration Number 2947247. Registered Office: Diamond House, Lotus Park, Kingsbury Crescent, Staines, Middlesex TW18 3AG, United Kingdom. Copyright © Dow Hyperlast
®™ Trademark of Hyperlast Limited
®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow