| Materials Needed |
|
|
STYROFOAM™ Brand Foam:
Sheets, 36" x 12" x 1", three
Other Materials:
Traditional wallpaper, one roll
Grosgrain or velvet ribbon, 1" x 2-3/4 yds. per panel
Yardstick or ruler
Scissors
Straight pins
Poster adhesive or small sawtooth hangers and nails
Low-temp glue gun and glue sticks
Thick, white craft glue
|
| Instructions |
| 1. Cut three 12" x 36" panels from wallpaper, taking note of desired design placement. |
| 2. Spread thick coat of white glue on back of first piece and press to foam sheet; smooth with fingers and let dry. Meanwhile, glue remaining wallpaper panels to foam sheets. Let dry completely. |
| 3. Beginning and ending at one lower corner, use glue gun to secure ribbon around edges of each foam sheet; trim excess, allowing a bit of overlap. |
| 4. Use poster adhesive to attach to wall. Or, glue sawtooth hangers to back of each panel; for additional hold, insert and glue two straight pins through holes in sawtooth picture hanger; let dry. |
Form No. 179-11133
|
®™* Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow
|
